ESTechnical Reflow Oven Controller Full Upgrade Kit for T962A
9 of 50
Mark connector locations
To fit the USB panel connector, a 24mm diameter hole is needed, two 2mm screw holes secure
18.
the connector to the panel with self tapping screws. Referring to Diagram 1 drill/machine/punch
this to its final size.
Place the connector into the 24mm diameter hole and carefully mark the location of the two
19.
screw holes, this prevents misalignment of the screw holes. Center punch and drill the screw
holes with a 2mm drill.
Clean all burrs from the newly cut holes.
20.
To fit the thermocouple socket a rectangular cutout is needed. Referring to Diagram 1, above,
21.
mark the center of the rectangle, mark out the outline of the hole. Drill then file the hole to final
size, or use a rectangular punch such as CP-1 from Omega. Alternatively this hole could be
machined.
