manualshive.com logo in svg

Estate EST-MTB29, Instruction Manual

Share
Download
Estate EST-MTB29 Instruction Manual Download Page 17

17

po.org

MODEL: EST-MTB29  PRODUCT CODE: 704513  |  MODEL: EST-MTB29M  PRODUCT CODE: 704512    10/2021

AFTER SALES SUPPORT

info@tem

AUS

1300 112 534

Other Useful Information (Cont.)

Storage

When it is not in use, store the bicycle in a cool, dry place, protected from dust and  
high humidity, and out of reach of children. 
For prolonged storage we recommend using the original carton for the bike.

Service and repair 

WARNING: Replace worn parts! 

As with all mechanical components, the bicycle 

is subjected to wear and high stresses. Different materials and components may 
react to wear or stress fatigue in different ways. If the design life of a component 
has been exceeded, it may suddenly fail, possibly causing injuries to the rider. Any 
form of crack, scratch or change of colouring in highly stressed areas indicates 
that the life of the component has been reached and it should be replaced.

WARNING: Replace wheel rims and brake pads!

Danger of wheel failure due to rim and brake pad wear!
Replace the wheel when any part of the rim wear groove is not visible.
Replace the brake pad when any part of the brake pad wear groove is not visible.

Replacement of disc brakes
Check the brakes on your bike regularly. When they need replacing, please take 
the bike to a competent bicycle mechanic for replacement.

Spare parts

Our after sales support centre stocks the following spare parts for the bicycle:
Bell 

 

    Brake 

lever

Chain 

    Chainwheel 

set

Derailleur    Fork 

(29")

Freewheel 

   Front 

hub

Pedal 

    PU 

leather 

saddle

Reflectors (F/R wheel, F white, R red) 

Seat post

Shifter (Shimano) 

 

 

Steel ball bearing headset

Steel sealed ball bearings 

 

Stem

Tyre and tube
To purchase a part or book a service, please contact the centre on 1300 112 534 
or email us at [email protected]. 

Summary of Contents for EST-MTB29





















Reviews:

No comments

Brands by name

Popular brands

Load more brands