background image

18

po.org

MODEL: EST-MTB24G  PRODUCT CODE: 705558  |  MODEL: EST-MTB24B  PRODUCT CODE: 705559    11/2021

AFTER SALES SUPPORT

info@tem

AUS

1300 112 534

Other Useful Information (Cont.)

Service and Repair 

WARNING: Replace worn parts! 

As with all mechanical components, the bicycle 

is subjected to wear and high stresses. Different materials and components may 
react to wear or stress fatigue in different ways. If the design life of a component 
has been exceeded, it may suddenly fail, possibly causing injuries to the rider. Any 
form of crack, scratch or change of colouring in highly stressed areas indicates 
that the life of the component has been reached and it should be replaced.

WARNING: Replace wheel rims and brake pads! 

Danger of wheel failure due to 

rim and brake pad wear! Replace the wheel when any part of the rim wear groove 
is not visible. Replace the brake pad when any part of the brake pad wear groove 
is not visible.

Spare Parts

Our after sales support centre stocks spare alloy bells, wheel reflectors (front and 
rear), and red rear and white front reflectors for the bicycle.

 

To purchase a part, 

please contact the centre on 1300 112 534 or email us at [email protected].

Compliance

This appliance has been fully tested and meets all requirements as set out by 
standard AS 1927.

Technical Specifications

Specifications  

Girls' bike (EST-MTB24G)
Boys' bike (EST-MTB24B)

Maximum rider weight

100 kg

Product weight (net)

11.3 kg

Product dimensions (assembled)

124 x 18 x 63 cm

Lightweight alloy frame

29.5 cm

Tyres

24 " x 2.125 "

Freewheel

Steel cassette 14-28 T, 7 S

Derailleur

Shimano right side 7 S

Chain

½ ” x 3/32 ” x 110 L

Fork

Steel MTB fork

Summary of Contents for EST-MTB24B





















Reviews: