11
po.org
MODEL: EST-MTB24G PRODUCT CODE: 705558 | MODEL: EST-MTB24B PRODUCT CODE: 705559 11/2021
AFTER SALES SUPPORT
info@tem
AUS
1300 112 534
Fig. 6
Fig. 7
Assembly (Cont.)
Step 2: Adjusting the Front Brake
The front V-brakes have been pre-installed at the factory and require adjustment
after the front wheel has been assembled.
1. Using an 5 mm Allen key, loosen the cable fixing bolt and adjust the cable
tension in each brake arm so that both sides are equally and properly tensioned.
2. After ensuring that the total clearance between both brake pads and the rim is
2–3 mm, tighten the cable fixing bolt (Fig. 6).
NOTE: As per the Australian/New Zealand standard, the left brake lever controls
the rear brake and the right brake lever controls the front brake, therefore please
use both brakes when braking.
CAUTION!
After long time use of the bicycle, the braking efficiency weakens and the brake
pads/discs ideally should be replaced by a skilled bicycle mechanic.
Brake pad replacement
Using the 5 mm Allen key, loosen the old brake pad bolt and replace it with a new
one, then adjust the position and tighten the brake pad bolt (Fig. 7).
