10
NOTICE
When the heater is first turned on, a slight odor may be present. This is normal and
should not occur again unless the heater is not used for a long period of time.
NOTICE
To improve operation, aim the remote control at the front of the fireplace. DO NOT
press the buttons too quickly. Give the unit time to respond to each command.
Remote Control
(Control panel POWER switch must be ON to use remote control.)
BUTTON
ACTION and INDICATION
REMOTE CONTROL
1. Press once. Flame effect turns on High and indicator
light turns on.
2. Press again. Power and all functions turn off.
1. Press once. Small indicator
lights up. Fan blows
cool air. 750W heater turns on and blows warm air.
2. Press again. Large indicator
lights up. 1500W
heater turns on and blows hot air.
3. Press again. Heaters turn off. Fan blows cool air to
allow heater to cool down, then turns off.
Press to cycle through the ten Flame Options
1. Press once. ½ h light turns on. Timer is set to ½ hour.
2. Press again. 1h light turns on. Timer is set to 1 hour.
3. Press until desired setting is reached. Timer setting
increases by ½ hour up to 7½ h.
Examples: 3 hours = 2h+1h; 7½ hours = 4h+2h+1h+½h.
4. Press again. Timer setting increases by ½ hour until
desired setting is reached, or until timer turns off.
5. Press again to restart timer from ½h.
Controls the LED light strips at the left and right edges of
the fireplace. The LED backlights include individual and
alternating color combinations
When the Power is turned on, the flame effect starts at High.
1. Press once. Flame effect changes from High to Low.
NOTICE
To improve operation, aim the remote control at the front of the fireplace. DO NOT
press the buttons too quickly. Give the unit time to respond to each command.
