For a basic connection from your Set Top Box to the television, use the SCART connection.
For the highest quality connection use a direct HDMI connection, see picture
Connecting to a television
After all connections have been made properly, switch on Tv and make sure the unit is connected
to the Main Power. Press Power button to switch the unit on. If you are using the unit for the first
time or have restored the unit to factory default, the installation guide menu will appear on your
Tv screen. Select Antenna Power ‘On’ if you’re using Active Antenna.
(1) [OSD Language] press RIGHT/LEFT key to select a language.
(2) [Country] press RIGHT/LEFT key to select your area of residence.
(3) Press ‘OK’ to start [Channel Search]. Once channel tuning is complete, you can start watching
Tv programs.
First time Installation
The manufacturer reserves the right to change the configuration, technical or any other
parameters without prior notice.
troubleshooting
Problem
Potential Reasons
What to do
No picture
Power isn’t connected
Connect the power
The power switch is not on
Switch on the power
Screen shows’ No
Signal’
Areal cable not connected
Plug in the Areal cable
Aerial cable is faulty
Check aerial cable and
connections
No sound from
speaker
No or incorrect connection with
SCART /HDMI cables
Connect the cables correctly
The program is a radio program
Press <Tv/Radio> key to shift into
Tv mode
Remote Control is
not responding
The battery is exhausted
Change battery
Remote Control is not facing or close
enough to the STB
Adjust the position of the Remote
Control and move closer to
the unit
Picture is breaking
up
The signal is too weak
Check aerial, cable and
connections, use signal quality
/strength meter as described
above
