Remote Control
1.
PoWER:
Switch the receiver in and out of standby model.
2.
MutE:
Disable Audio output
3.
<0>-<9>:
Numeric keys.
4.
CH-/CH+:
Program changing keys.
5.
MEnu:
Display main menu on Tv screen, and press again to
exit current menu.
6.
oK:
To confirm current setting, or display all programs in
no-menu mode.
7.
VoL-/VoL+:
Turns up/down volume.
8.
: Press to move the cursor.
9.
EPG:
Shows the Electronic Program Guide.
10.
FaV:
Display your favorite channels list. Press FAv again to
access to the other favorite lists.
11.
V-FoRMat:
Switch the HDMI 720P and 1080i.
12.
RECaLL:
Go back to the previous viewed channel.
13.
Red/green/yellow/blue:
Use to navigate between pages in
teletext mode and special functions in menu or EPG
14.
REC:
Record in USB drive
15.
aSPECt:
Switch 4:3/16:9.
16.
ttX:
Switch on Teletext, if current channel has this option,
and use EXIT key to quit Teletext
17.
SuBtItLE:
Display subtitle options (availability depends
on the channel)
18.
LanG:
Change the Audio language and Left/Right channel
(Availability depends on the channel)
19.
tIMESHIFt:
Use after RECORD button for time shift
20.
EXIt:
Use this key to quit current menu.
21.
InFo:
Display information about the current channel.
22.
tV/RaDIo:
Switch between Digital Radio and DvB-T modes.
23.
PaGE+/PaGE-:
To navigate inside the menus.
24.
tIMER:
Use to access ON/OFF timer directly
Multimedia keys:
using the Remote Control
To use the Remote Control, point it towards the front of the Digital Set Top Box.
The Remote Control has a range of up to 7 meters from the Set Top Box at an angle of up to 60
degrees. The Remote Control will not operate if its IR sensor is blocked.
Sunlight or very bright light
decrease the sensitivity of the
Remote Control
