2.
Assemble ribs(W4-W7) and glue together with thick CA.
4.
Glue covering sheets(W14-W15, W17) and small
sheets(W18).
5.
Remove right wing from the jigs and covering sheets and
small sheets for wing bottom(W14-W16, W18).
6.
Apply
thick CA glue
at each joints for reinforcing and
then carefully sand surfaces.
Page 4
FUSELAGE
1.
Lay waxed paper or PVC film over the plan.
Pin the parts for fuselage right fore side(F1-F5) on the plan
and glue together with thick CA.
6.
Assemble seat(C1-C5), control stick(C6-C7) and glue
