Download full color instructions from
http://www.estarmodels.com [Download] menu.
Page 1
PREPARATION
Remove parts from laser-cut panel and group as shown
above.
VERTICAL TAIL
1.
Lay waxed paper or PVC film over the plan.
Pin the rudder parts(R1-R7) on the plan and glue together
with thick CA.
HORIZONTAL TAIL
1.
Pin the stabilizer jigs on the plan.
2.
Lay the stabilizer parts(S1-S5, S8) on the jig and pin the
lower spars(S1-S2) to the jigs.
3.
Assemble and glue upper spars(S1-S2), round tip(S7).
4.
Glue small sheets(S10-S11, S17). Assemble and glue
the elevator parts(E1-E6) together on the jigs.
