Delivery and
commissioning
16
DDE 2000 // DDE 300
0973008-52-03
5.
Delivery and commissioning
5.1
Delivery and transport
DANGER
Danger from falling product
Do not walk under heavy loads.
The lifting and transporting equipment must be designed for the weight of
the product.
WARNING
Crushing hazard if the product settles during transport
Secure the product during transport.
Wear safety shoes.
CAUTION
Risk of damaging the product due to improper transport.
Do not push the product over the floor if it does not have any rollers.
Use only suitable lifting and transport equipment (such as a forklift or lift
truck) when transporting the product to its set-up location.
Watch out for the centre of gravity
– which is not in the centre – when
positioning.
Make sure the floor has adequate weight capacity and can be properly driven on
when transporting the product.
Permitted sling gear:
Lifting belt
Round sling
Permitted lifting gear:
Forklift
Crane
Upon delivery inspect the device for transportation damage.
Damage determined must be reported and documented
immediately. At delivery, the device is fastened to a pallet.
1. Remove the protective cover and floor securing devices.
2. Check the delivery is complete
3. Lift the device from the pallet using a forklift at the positions
provided and place it down on the immediately adjacent floor
Or
4. Hang the device using sling gear (e.g. a lifting belt, round sling)
at the positions provided, lift it from the pallet and place it down
on the immediately adjacent floor.
5. Pay attention to the weight of the device and its centre of gravity
during all transport work.
6. Use the attached rollers for further transport to its installation
location.