31
11/ 2019
BENNING CM 12
5.5 Data logger function “LOG”
The
data logger function “LOG”
allows the automatic storage of series of
measurements with a predefined measuring interval and up to 9,999 measured
values. The measuring interval can be set from 1 s to 600 s. For further proces-
sing, the measured values can be read out later by means of the display
J
or
via Bluetooth
®
.
Use the
Cursor
key
M
to select the “
LOG
” function and press the
OK/ENTER
key
N
to open the “
LOG
” menu.
Use the
Cursor
keys
M
to select the following submenus:
SAVE
Press the
OK/ENTER
key
N
to start the data logger function
“LOG”. Press the
OK/ENTER
key
N
again to stop the storage.
Note:
Any restart will delete all measured values stored in the data
logger (LOG).
LOAD
Press the
OK/ENTER
key
N
to open the measured values
stored in the data logger. Press the
Cursor
keys
M
(right/►,
left/◄) to call the storage location number on the display
J
.
Press the
RANGE
key
7
to toggle between the storage loca
-
tion number and the stored measured value. Press the
OK/
ENTER
key
N
to cancel the function.
RATE
Press the
OK/ENTER
key
N
to set the sampling rate defi-
ning the time interval between two measuring points. Use the
Cursor
keys
M
(right/ ►, left/ ◄) to adjust the sampling from
1 s to 600 s.
Press the
OK/ENTER
key
N
to confirm.
The deviation of the timer is less than 3 s per hour.
Use the
Cursor
key
M
to select the “
LOG
” function and press the
OK/ENTER
