EN
ESPRESSO AND HOT DRINK MACHINE WHICH USES SINGLE-DOSE CAPSULES
23
MAINTENANCE AND CLEANING
Before cleaning, unplug the machine and let it
cool down.
The water tank should be rinsed and re-filled
daily. Every two/three days, empty and clean the
discharge basin and the used capsule drawer.
Do not dry the machine or its components in an
oven. Never use alcaline detergents, thinners,
alcohol or harsh substances.
Do not immerse the machine in water.
Except in specific cases, all the components
which are not removable must be cleaned with
cold water and non-abrasive cloths or sponges.
TO CLEAN DISCHARGE BASIN AND USED
CAPSULE DRAWER
Remove the cup grid, the discharge basin and
the used capsule drawer. Dispose of any used
capsules.
Wash with cold or tepid water, dry and re-
assemble correctly. Do not wash any component
of the machine in the dishwasher.
TO CLEAN BREWING SPOUT
Remove the brewing spout by pulling it down.
Wash with cold or tepid water, dry and re-
assemble by pressing upward.
CLEANING AND DESCALING OPERATIONS
To ensure high quality beverages and the long
life of the machine, it is essential to periodically
descale it every 6 months or after 600 uses.
The machine may be programmed to display
an alarm (buttons 2/3 blinking blue color) after
600 uses.
The blinking blue alarm signal ceases after
descaling has been carried out; it starts again
after another 600 uses.
Carry out the descaling operation utilizing a
descaler specifically recommended for espresso
machines.
Carefully follow the safety instructions of the
descaler. Avoid contact with eyes, skin and
surrounding surfaces.
Only use a descaler for espresso machines.
Fill the water tank with a solution of water and
descaler, following the instructions on the
descaler package.
Use an empty capsule, which is included in the
accessories of the machine. Or, using a small
spoon, empty a capsule, carefully removing all
espresso powder.
Turn off the general on/off switch located on the
back of the machine.
Slide open the capsule insertion sliding board.
Press button 3 and hold it down while turning
the on/off switch on the back, to ON.
After 5 seconds, button 3 shows amber color.
Insert the empty capsule as if preparing a drink.
Press button 3 amber color.
The descaling cycle lasts about 25 minutes: it has
ended when buttons 1/2/3 are all blinking blue.
Remove the water tank, rinse well and fill with
fresh clean water.
Place the water tank on the machine and press
any button to begin the washing cycle. When
the washing cycle is complete, the machine will
automatically go to stand by.
Remove the water tank, rinse well and fill with
clean drinking water.
Place the water tank on the machine.
Open and close the capsule insertion sliding
board to eject the empty capsule.
The machine is ready for use.
it is possible, but not advisable, to manually re-
set the descaling alarm signal.
Perform points 3 and 4 above.
Hold down button 1 while turning the machine
ON using the switch on the back. Wait 5 seconds
and release button 1.
The machine is now ready.
For more information, contact your trusty dealer.
1
1
1
5
2
6
3
7
4
8
10
11
12
13
9
2
