SpeedFace M1/M2
User Manual
Device side
Server address:
Set as the IP address of ZKBioAcess server.
Server port:
Set as the service port of ZKBioAccess (The default is 8088).
Software side
Login to ZKBioAccess software, click
System
>
Communication
>
Communication Monitor
to set the
ADMS Service Port, as shown in the figure below:
13
Connect to ZKBioAccess Software
13.1
Set the Communication Address
1.
Click
COMM.
>
Ethernet
in the main menu to set the IP address and Gateway of the device. (
Note:
The IP address should be able to communicate with the ZKBioAccess server, preferably in the same
network segment with the server address.)
2.
In the main menu, click
COMM.
>
Cloud Server Setting
to set the Server address and Server port.
P a g e
| 70
Summary of Contents for AiFace-Venus
Page 1: ...User Manual AiFace Venus www esslsecurity com...
Page 18: ...SpeedFace M1 M2 User Manual Successful Verification Failed Verification P a g e 21...
Page 20: ...SpeedFace M1 M2 User Manual 2 Input the password and press OK P a g e 23...
Page 21: ...SpeedFace M1 M2 User Manual Successful Verification Failed Verification P a g e 24...
