DESCRIPTION
General specifications
The
MMW
is an innovative, easy-to
use hand-held edger equipped with
either one or two diamond-coated
grinding wheels.
The tapered contour of the cover
gives easy, direct access to the
wheels and makes it possible to
choose the grinding point.
The modern-design, ergonomic
hand rest is multi-functional.
The water in the tank is changed
with a simple manoeuvre, without
the need to dismantle the fairing.
Technical description
The MMW comes with either one
or two wheels: finishing and/or
roughing.
Belt drive which separates the
motor from the edging chamber.
Great operating stability thanks to
the spindle's "floating" housing.
Quick and easy dismantling of the
cover, without the need for special
tools.
Dual-function hand rest:
1. Turns the hand-held edger on
and off (on/off indicator light).
2. Provides
protection
from
splashes during spraying.
DESCRIPTION
(continued)
Setting up the machine
- Unpack the machine
IMPORTANT: The hand rest
is
not a handle
- Prepare the working area
(only for the external cooling
system).
- Push out the holes (pre
drilled) Inlet/ Outflow.
- Make a space for the cooling
system.
Use a table without drawers!
- Disconnect the machine.
- Remove the cover of the
MMW by loosening the three
screws towards the left. One
screw is on the left, another is
on the right and the third is at
the back of the machine.
- Place the hand rest in the
"Off' position.
- Remove the cooling tank.
- Slot in the drainage device
under the tank and connect the
water backup pipe. Guide the
water inlet pipe through the
frame and attach it to the lead
through with the pipe clamp.
Before you start edging, make
sure that the cover has been
put back in position.
4
Summary of Contents for MMW
Page 1: ...MMW 1...
