INTRODUCTION
Ideal for:
♦ Finishing and bevel work
♦ Finishing and retouching
♦ Roughing, finishing and
retouching
With one or two diamond
grinding wheels in a restricted
space
♦ Large working area
♦ Large grinding wheel
(150 mm in diameter)
Working with dry hands
♦ Permanently dry hand rest
also used as on-off switch
and indicator light.
Spray without splashing
Fast water run-off
♦ Built-in water system
+ Easy drainage of system
+ Direct water connection
With a recognised ecological
safety device
♦ Spraying system based
simply on the filling of the
tank.
Accessories:
Plexiglas protective hood
White cleaning stone
2 yellow sponges
2 white sponges
1 cruciform screwdriver
1 open-end spanner
3 Allen keys
SAFETY
INSTRUCTIONS
instruction
1. Read
the
handbook carefully.
2. Your
edger
must
be
connected to
an
network
with
connection.
an
This
electric
earth
earth
connection must meet current
standards and be checked by
an electrician. Make sure that
the voltage of the electrical
network into which your edger
is connected corresponds to
the voltage on the identification
plate.
3. Only use your edger for the
machining of glass and
plastic lenses.
4. For your
own
safety,
we advise that you wear safety
glasses during machining.
5. Only
use
ESSILOR
accessories and/or spare parts.
ESSILOR will not be held
responsible if this instruction is
not complied with.
6. Always disconnect your
machine during maintenance
operations (cleaning of sponge,
drainage of tank, changing of
wheels, etc.).
7. Do not carry out any
electrical modifications (risk of
electrical disruptions).
8. The installation of additional
devices
such
as
an
electrovalve must be carried
out by authorised staff.
9. Do not use any corrosive
cleaning products.
1 O.Disconnect the machine
immediately if any defect is
detected.
3
Summary of Contents for MMW
Page 1: ...MMW 1...
