The front wheel bearings should be lubricated every 5000 miles with a good grade of cup grease. Remove hub and
wash bearings and inside of hub with kerosene. Pack each bearing and hub with 3 ounces of No. 2 cup grease (see
page 12 for adjusting wheel bearings).
The rear wheel bearings should be lubricated every 5000 miles with No. 3 cup grease. Remove four nuts from bearing
cap "A" and remove caps and shims. Pull bearing and after washing bearing and housing in kerosene repack each
bearing housing with 1-1/2 ounces of cup grease. Then replace bearings, shims and caps, draw up wheel hub tight on
shaft and install cotter pin.
Steering Gear
Summer S.A.E. 160
Winter S.A.E. 110
[Pg 7]
