appliance description
18
V.1.0
use
19
V.1.0
appliance description
1.
Brush heads
2.
Body of the appliance
3.
On button
4.
Off button
5.
Battery compartment
1
2
3
4
5
Hourglass
Spare brush head
battery installation/replacement
•
Unscrew the battery compartment cover (5) and insert the 2 AAA / LR3 1.5 V batteries
(supplied), respecting the indicated polarities (+/-).
•
Then screw the battery compartment cover back on without forcing it.
•
Replace the batteries when you notice that the brushing intensity becomes too low.
•
Do not use two different types of batteries together.
•
If you do not use the toothbrush for a while, remove the batteries from the body of
the appliance.
•
Check the condition of the batteries periodically. Leaking batteries can damage the
toothbrush. If the batteries leak, do not reuse the toothbrush.
before initial use
Before first use, clean the new brush head under tap water.
use
1.
Install the brush head on the body of the appliance, with the brush head pointing
forward and aligned with the buttons.
2.
Moisten the brush head under tap water and apply a small amount of toothpaste
to the brush head.
3.
Place the toothbrush in your mouth and press the ‘on’ button (3). To avoid
splashing, do not switch on the brush until you have put it in your mouth.
Do not hesitate to consult your dentist for brushing advice.
4.
To turn off the toothbrush, press the ‘off’ button (4).
5.
Remove the toothbrush from your mouth and then clean the brush head and
toothbrush under tap water.
n
ote
: Your gums may bleed slightly after using the electric toothbrush the first few
times. As a general rule, the bleeding should stop after a few days. If this persists for
more than two weeks, we advise you to consult your dentist.
t
ip
:
Do not press the toothbrush too hard on your teeth. Don't brush like a manual
toothbrush: the toothbrush does it for you. Gently apply the electric toothbrush against
your teeth.
