laundry preparation
60
cleaning and maintenance
61
V.1.0
V.1.0
N
ote
: Laundry can be added or removed as many times as you like during a drying cycle.
However, this will repeatedly interrupt the drying process and lengthen the duration of the
programme, resulting in increased energy consumption. For this reason, adding or removing
laundry during a programme is not recommended.
N
ote
: If you select a new programme by turning the programme selection knob while the
dryer is in “pause” mode, the current programme ends.
WARNING: Do not touch the interior surface of the drum when adding or removing laundry
during a running programme as it is very hot!
Child safety
The child lock prevents programme interruption by locking the buttons when a programme
is running.
When the child lock is activated, the dryer door and all the buttons are deactivated (you can
still stop the appliance by turning the programme selection knob).
−
To activate the child lock:
Simultaneously hold the
(acoustic signal cancellation) and
(delayed start)
buttons for three seconds. The
indicator light comes on.
•
When you turn the programme selection knob or press a button, two beeps sound to
inform you that the child lock is activated.
•
To start a new programme at the end of the previous one or to interrupt the programme,
you must deactivate the child lock.
−
To deactivate the child lock:
Repeat the steps for activation: simultaneously hold the
(acoustic signal cancellation)
and
(delayed start) buttons for three seconds.
The child lock also deactivates when you turn off the appliance by turning the programme
selection knob to the “Off”
position and then turn it on again.
Cancelling a running programme
To cancel a running programme or stop the drying process for any reason after the programme
has started, turn the programme selection knob to the “Stop”
position.
If the inside of the appliance is very hot, run a “Cool-down cycle” programme to cool it.
End of programme
The “end”
and “clean filter”
indicator lights come on at the end of the programme.
To turn off the dryer, turn the programme selection knob to the “Off”
position.
N
ote
: A 2-hour wrinkle guard programme
is automatically activated if you do not
remove your laundry from the appliance at the end of a programme. The dryer spins the
laundry every ten minutes to prevent it from wrinkling.
•
Clean the filter after each use (see the “Cleaning the Filter” section).
cleaning and maintenance
Lint filter
The lint filter collects lint and fibres released from the laundry into the air during the drying cycle.
These particles generally form due to wear and washing.
To clean the filter:
1.
Open the dryer door.
2.
Remove the filter by lifting it up, then open it.
3.
Remove lint, fibres and cotton residue by hand or with a soft cloth.
4.
Close the filter and correctly place it back in its housing.
Always clean the filter after each drying programme.
!
Summary of Contents for 0008007957
Page 83: ......