18
V.5.0
use
This seat massager is the solution for:
•
Relaxing tired muscles and relieving tension,
•
Providing deep relaxation for an anti-stress effect.
1.
After setting up and plugging in the device, press the “On/Off” button. The orange lamp
will light up.
Then determine the part of your back to be treated:
•
“Full back” to massage your entire back
•
“Upper back” to massage your upper back (dorsal region)
•
“Lower back” to massage your lower back (lumbar region)
To stop the massage, press the chosen button again. The corresponding green lamp will
switch off and the massage heads will stop.
To resume the massage, press the button of your choice again.
2.
Press the “Heat” button to activate the heating function together with the back massage.
The corresponding red lamp will light up, and the massage heads will emit gentle, relaxing
heat during the massage.
The heat is not immediate. Wait a few minutes to feel its effects.
3.
Press the “Vibration” button to activate this function on the seat cushion. The corresponding
green lamp will light up. You can select 3 different vibration intensities by pressing this
button once, twice or three times. If you press the button a fourth time, you will completely
stop the function.
The “Vibration” function can be selected at the same time as the back massage and
heating function or independently of the other functions.
4.
To turn off the device, press the “On/Off” button. The massage heads will return the bottom
of the backrest for future use. The orange lamp will flash, and the device will turn off after
a few seconds.
5.
After each use,
unplug the cord from the power point.
use
