10
Modes of Operation
Air Extraction
The air is drawn in and cleaned by the acrylic filters and directed outside.
The non-return flap supplied with the appliance must be fitted in the exhaust hole.
Having a non-return flap fitted in the ducting ensures that air, once ducted to the outside,
cannot get back into the room again.
The flap is closed when the cooker hood is switched off.
When the cooker hood is switched on, the non-return flap opens for the cooking vapours
to be ducted away.
Operation
To Select the Fan Motor Speed
Your cooker hood has 3 levels of extraction. Depending on the cooking and frying vapours, you should run the
cooker hood with "1" low, "2" medium or "3" high speed. To run the cooker hood, slide the motor speed selector to
the desired extraction speed on the front panel.
Slide the motor speed selector to the "0" position to turn the unit off.
• Carbon filters are available as an optional extra, see rear page for ordering details.
• Before using the cooker hood in recirculation mode, ensure that the carbon filter is in place. See
“Cleaning and Maintenance”.
• Do not flambé under the cooker hood.
• CAUTION: Accessible parts may become hot when used with cooking appliances.
Ensure there is adequate ventilation in the room when the cooker hood is used at the same time as other
appliances burning gas or other fuels.
Air Recirculation
The air is drawn in and cleaned by a carbon filter (optional). The cleaned air is then
recirculated back into the kitchen through the recirculation vents in the top of the cooker
hood.
Cooker Hood Lighting
Slide the lamp switch to the on position ( 1 ) to switch the lamps on.
Slide the lamp switch to the off position ( 0 ) to switch the lamps off.
