2
Identify the difference between the upper and lower
Frame Tubing pieces (A & B). Both of the pieces have
stickers to identify them. One Frame Tubing piece is
labeled “A” and the other is labeled “B”.
1
Place the Seat Panel (C) upside down on a flat
surface with the triangle indent facing upwards. This
triangle indicates the front of the Seat Panel (C).
4
Place lower Frame Tubing piece “B” in the indent
labeled “B” with the legs facing upwards crossing
over upper Frame Tubing piece “A”.
3
Place upper Frame Tubing piece “A” in the indent
labeled “A”, with the legs facing upwards.
5
Take one of the Wing Knob Screws (F) and Wave
Washers (G) and place the Wave Washer (G), with
arc facing down, onto the Wing Knob Screw (F).
Insert the Wing Knob Screw (F) into the hole where
the two Frame Tubing pieces (A & B) overlap. Hand
tighten the Wing Knob Screw (F) while making sure
the Wave Washer (G) aligns with the tubing.
6
Take the four remaining Wing Knob Screws (F) and
Wave Washers (G) and place in the four remaining
holes as in Step 5. Hand tighten Wing Knob
Screws (F).
A
B
x 1
x 4
Front
Upper Frame
Lower Frame
A
B
A
A
B
A
B
A
B
A
B
A
B
A
B
A
B
Summary of Contents for B3010
Page 4: ......
