7
Quick Setup Guide
Hardware Installation:
1.
Remove the back cover of the Hub,
2.
Do one of the following, according to your choice of
external communications channel:
●
Insert the SIM-card , if your HUB supports GSM
Communications.
●
Attach an Ethernet LAN cable between the port on
the back of the Hub and a free socket in your Internet
modem or router.
NOTE:
If you choose to install both the SIM-card and LAN
cable, the cellular channel is used as backup.
3.
Insert the backup battery
10
over the SIM-card with
the contacts facing downwards and towards the base
and return the back cover of the Hub.
4.
Plug a power cord into the mini-USB socket on the back of
the Hub and plug the cube into a power outlet. The Hub
LED lights up
Red
. The LED switches to
Orange
when the
Hub connects to the network.
5.
Wait for the front panel LED to turn
Green.
It should
take about a minute.
The WeR@Home™ Hub
2.1
Summary of Contents for WeR@Home
Page 1: ...Quick Setup Guide...