Installing the Extender
6
WeR@Home™ Smart Extender
6.
Follow the instructions in the tutorial:
a.
Remove the back cover from the extender.
b.
If you are using GSM, ensure that the SIM-card is securely installed.
c.
If you are using Ethernet, plug a network cable into the extender and the other end into a
network connection.
d.
Insert the backup battery into the battery compartment, above the SIM-card, such that the
battery label faces upward and the battery contacts face the extender's base.
Caution:
Risk of explosion if battery is replaced by an incorrect type.
dispose of used batteries according to the instructions.
e.
Replace the back cover.
f.
Plug the power adapter cable into the mini-USB connector on the back of the extender and
the power adapter cube into a power outlet. The LED on the front panel lights red
.
g.
Wait for the LED on the front panel to light up green.
h.
Take a note of the serial number on the bottom of the extender.
7.
In the app, tap
Register now
.
8.
Follow the on-screen instructions.
