Essence FENIKS, User Manual

Page: 9 / 56

1
2
3
4
5
6
7
8
9
10
8
INPUT switch: toggles between USB, TOSLINK Optical, and Analog. LED will
blink on USB and TOSLINK if a signal is not detected. Even if unplugged from
power, the system will remember the last selected input.
MODE switch: toggles between Speakers (blue), Headphones (green), and
Standby (red).
TOSLINK Optical input: connect to the digital output of your television or other
digital source such as Bluetooth® receiver. The system will automatically enter
Standby when source device is turned off, or if there is no signal for 5 minutes,
and wake once a signal returns.
3.5mm and stereo RCA analog inputs: use the 3.5mm input to connect your
phone or tablet and the RCA inputs for a phono stage.
USB input: for Windows and Mac computers and smartphone USB adapters*.
The system will automatically enter Standby when computer is put to sleep or
turned off, or if there is no signal for 15 minutes, and wake once a signal returns.
Amplified headphone output
Subwoofer output (mono)
Power
Output to left channel: only use provided mini-XLR speaker cable. When
unplugging, be sure to press the plug’s release button firmly before pulling out.
Voltage switch: if you move to a different country, choose between 200-240V
(arrow pointing right) and 100-120V (arrow pointing up). Requires 3mm flat
screwdriver to turn switch. NEVER perform this operation while the power cable
is plugged in.
* Apple Lightning to USB Camera Adapter (iPhone/iPad) or OTG adapter (Android 5.0+)