Setting Up the Bed Sensor
6
Care@Home™ Bed Sensor User Guide
Control Panel Response
Meaning
Low pitch beep and
EMERGENCY
button ring lights
blue as
EMERGENCY
button
lights red.
This bed sensor has already been paired with
this control panel.
Beeps and the
EMERGENCY
button ring lights red
Bed sensor cannot be paired. Control panel
memory is full.
8.
Attach the mounting base to the transmitter. The LED lights red.
2.3.
Placing the Bed Sensor
Proper placement of the bed sensor is important for accurate detection and the resident's comfort.
The pressure pad should be placed in the resident's bed:
On top of the mattress
Covered by a sheet
At the approximate location of the resident's waist/buttocks
With the cable on the side not used for getting in and out of bed
Place the transmitter out of the resident's way, for example:
Under the mattress
Between the bedframe and the mattress
Transmitter
Pressure pad
