Installing the SK2
10
Care@Home™ Smoke Detector User Guide
3.
Make a pencil mark through
two
screw holes in the mounting bracket, one opposite the other, as
shown in the following image.
4.
Remove the mounting bracket from the ceiling (or wall).
5.
Drill a hole at each of the pencil marks using a 5 mm (3/16-in.) drill bit and insert the wall anchors.
Caution:
When you drill the holes, prevent dust from getting on the SK2.
6.
Mount the bracket using the screws.
WARNING!
Do not connect the SK2 to any other alarm or auxiliary device.
Connecting anything else to the SK2 prevents the proper operation of the alarm.
Bracket tabs
