background image

End User License Agreement and Terms & Conditions 

 

 

32 

 

Care@Home™ Indoor Photo Detector User Guide 

 

By downloading or using the Application or by entering the Site, you fully understand and unambiguously consent to the collection and processing of such information and to the terms of this Privacy Policy. 
If you do not agree to the terms of this Privacy Policy, you must not use the Application or Site. 

This Privacy Policy may be amended or updated from time to time. If we make any material changes to this Privacy Policy, Service Provider shall update you of these changes. Our website will reflect changes 
in the Privacy Policy as well and you are advised to consult this Privacy Policy regularly for any changes. 

 

_

Information Collection

Personally Identifiable Information 

In the course of using the Application, we might ask you to provide us with certain personally identifiable information that can be used to contact or identify you (“

Personal Information

”). Personal 

Information may include, but is not limited to, your name, country of residence, email address and website address. 

Non-Personally Identifiable Information 

When you use the Application (whether such use is performed on the System or a Device, on the Site or on a website of one of our partners or other third parties), we collect information regarding your use 
of the Application, and information that your browser sends whenever you visit a site or online service, including, without limitation, your computer's Internet Protocol (IP) address, browser type, the web 
page you were visiting before, and information for which you search. 

When you use a widget or any other tool offered by us, whether on the System or a Device, on the Site or on a third party website, including a website owned or operated by you, we may record data related 
to that activity, the deployment of the widget or tool, your location and any other account related data. 

Like many websites, we use “cookies” to collect information. A cookie is a small data file that we transfer to your computer's hard disk for record-keeping purposes. You can instruct your browser, by 
changing its options, to stop accepting cookies or to prompt you before accepting a cookie from the website you visit. If you do not accept cookies, however, you may not be able to use all portions of the 
Site or all functionality of the Application. 

We may present links in a format that enables us to keep track of whether these links have been followed

Third Party Sites 

This Privacy Policy applies only to the Application functionality on the System or a Device under your control, or on the Site. The Site may include links and references to the websites of others or third party 
advertisers. These other sites may place their own cookies or other files on your computer, collect data or solicit personal information from you. Other websites follow different rules regarding the use or 
disclosure of the Personal Information that you submit. We encourage you to read the privacy policies and other terms of the other websites. We do not review, approve, monitor, endorse, warrant, or make 
any representations with respect to such websites. In no event will we be responsible or liable, directly or indirectly, to anyone for any loss or damage arising from such sites, including without limitation for 
your use of such website and for any information submitted by you, or otherwise collected by such websites. 

 

 

1. Our Policy towards Children 

We do not knowingly collect personally identifiable information from children under the age of 18. If a parent or guardian becomes aware that his or her child has provided us with Personal Information 
without their consent, he or she should contact us at

 

[email protected]

. If we become aware that a child under 18 has provided us with Personal Information, we will delete such information from our 

files. 

2. Security 

We are concerned with safeguarding your information. We employ a variety of safety measures designed to protect your information from unauthorized access and disclosure. However, we cannot 
guarantee that your personal information or private communications will always remain private and secure. 

3. International Processing or Transfer 

Your information may be processed or transferred outside of your state, where the privacy laws may not be as protective as those in your jurisdiction. 

4. Disclosure 

We reserve the right to disclose any information obtained by us, including but not limited to Personal Information and Non Personally Identifiable Information, (i) if required by law or by any governmental 
authority; or (ii) in case of emergency; or (iii) to a successor entity in connection with a merger, acquisition, bankruptcy or sale of all or substantially all of our assets. 

5. Contacting Us 

If you have any concerns or questions about this Privacy Policy, please contact us a

[email protected]

.

 

Copyright © 2015, Essence SmartCare Ltd., All rights reserved. 

Summary of Contents for Care@Home ES700IPD




































Reviews: