Installation
10
Care@Home™ Indoor Photo Detector User Guide
Figure 4: Battery Insertion
When the batteries are installed, the LED in the lens compartment flashes
Red
, indicating that the
IPD has powered up successfully.
WARNING!
A new battery can explode if it is incorrectly installed. Discard used
batteries responsibly.
Remember: To comply with the UL certification standards, use GP International
Limited batteries.
9.
Holding the IPD, move at least 2 m (~6 ft. 7 in.) from the CP.
10.
Ensure that the pairing process is successful. The process can have the following results:
If the pairing process is successful, the CP beeps and the ring, around the CP
EMERGENCY
button, blinks
Blue
three times.
If the pairing process is not successful, the CP beeps and the ring lights up
Red
for two
seconds.
If the peripheral device is already paired, the CP beeps and the ring lights up alternating
between
Blue
and
Red
.
If no additional peripheral devices can be integrated, as when the CP memory is full, the CP
beeps and the ring lights up
Red
.
The CP returns to its previous operation mode automatically following the pairing process.
11.
Close the battery compartment.
12.
Insert the IPD into the mounting-base until the IPD clicks into place. Ensure that the lens is
pointing downward, as illustrated in Figure 5 below.
