Page 20
PLUS-500-I03-160617
Switching On a Heater
To switch on a heater it is necessary to actuate the desired cooking zone
or zones. Once the KEY LOCK is disabled and the hob turned ON, this is
done by means of selecting the heater and then selecting the required
power level.
Fig. 17
A heater is selected by touching the heater [HEATER_SELECTION] key for
500 milliseconds, a beep sounds and the heater display shows the power
level with normal brightness.
If more than one heat is already operating, then the heaters that are not
selected are dimmed.
If more than one heater is on, the heater selection will finish 10 second
after the last touch of the [-], [+] key or if another heater is selected. If
only one heater is on, the heater selection will finish if another heater is
selected.
When the heater selection is finished after 10 seconds, a beep sound
and all the heater displays that were dimed show the power levels with
normal brightness.
When the heater selection finishes, if the selected level is 0, the heater
display will be switched off
HEATER SELECTION
Summary of Contents for Plus 500
Page 1: ......
Page 29: ...Page 29 PLUS 500 I03 160617...
Page 30: ...Page 30 PLUS 500 I03 160617...
Page 35: ...Page 35 PLUS 500 I03 160617...
