Page 15
PLUS1-I03-060120
The cooker is not to be grouted or sealed at the back or sides of the worktop
as if any maintenance is required the cooker will have to be pulled away from
the wall at the rear.
The cooker weighs 195kg and the floor must be capable of withstanding the
load.
Make sure the cooker is level, use packing pieces if necessary.
The cooker may require access to the boiler points (if fitted) via the left side
panel once it is installed. We also ask that a 15mm gap is provided at the rear
of the cooker and a 10 mm gap between the cooker sides and any adjoining
non-combustible work surfaces that may be fitted is provided. If these
surfaces are combustible then these clearances increase to 50mm from the
sides and 100mm from the rear.
Due to the hand crafted nature of the cooker all dimensions are ±2mm.