Page 32
990ELX-I02-220319
To activate a timer for any zone, first of all this zone must be
selected (touch the ZONE SELECTION key). Then, using + or - keys a
power level must be decided (for example power level 2).
Timer option is not operational if power level value is ‘0’.
When required power level is selected, touching again ZONE
SELECTION key, a beep sounds and a letter T with a dot point
appears on the zone display. The remaining time will be displayed in
the opposite part of timed zone. If timed zone is in the down part,
timed time will appear in up displays and vice-verse.
Fig. 24
When the timer is waiting a time selection, the timer value can be
selected between 0 and 99 minutes touching the + or - keys. The
remaining time will be displayed in the opposite part of timed zone.
If the + or - key is touched continuously the change speed is
increased automatically. This makes it possible to reach the desired
time setting more quickly.
If a time is not selected before 10 seconds, or if the selected time is
0 after 10 seconds of the last touch of the + or the - key, the timer is
switched off.