Page 6
EL-I03-020518
CONNECTING YOUR COOKER
For your own safety we recommend that a competent person
installs your cooker. This cooker is designed to be installed using a
standard 13 Amp plug. A qualified electrician is not required.
Electrical connection
Ovens with a three-pole power supply cable are designed to
operate with alternated current at the supply frequency and
voltage indicated on the data plate (located behind the control
panel).
Connecting the power supply cable to the mains
The appliance is supplied fitted with a 1.5 metre cable and a
normalized 13 amp plug which correspond to the load indicated on
the data plate. Before making the connections check that: the
circuit breakers or fuses of the home system can support appliance
load (see data plate); the power supply system has a sufficient
earth connection which complies with the provisions of current
regulations and the law; there is easy access to the socket. Do not
use reducers or adapters as these could cause heating or burning.
BEFORE USING YOUR COOKER
Remove plastic protective covers from inner door panels and lift up
lid.
Before you cook for the first time, it is recommended that both
ovens be switched on to the highest setting for about an hour to
burn off any initial odours
The grill should also be turned on for 15 minutes with the top oven
door left open, before it is used for the first time.