Page 15
200-XK-I06-201217
OPERATING INSTRUCTIONS
Over firing will damage you stove.
To maintain peak efficiency, your stove should burn approximately 1.7kg
of well-seasoned wood per hour.
Your stove should not be used as an incinerator and only recommended
fuels shall be used.
Parts of the appliance, especially the external surfaces, will be hot to
touch when in operation and due care will need to be taken
It is essential that the fire has adequate air supply for combustion and
ventilation. Apertures provided for this purpose shall not be restricted.
Additional loose parts supplied inside your stove include:
A Stove Mitt – For removing the ash pan, adjusting the primary air controls,
adjusting the air wash control and operating the door handle.
A Riddling Tool – For operating the riddling grate and lifting the ash pan in and out.
A Flue Blanking Plug – To blank the top flue outlet if the rear outlet is to be used.
Fig. 6 – Stove Controls
Always use stove mitts
when adjusting
controls and opening
or closing the door.