Esse-ti HELPY, Quick Manual

Page: 4 / 36

Page 4 CONNECTING THE TELEPHONE LINE
CONNECTING THE TELEPHONE LINE
The alarm system is ready for connection over the GSM line by the proprietary
GSM Satellite. It allows the connection of a PSTN line or an universal GSM
gateway with the optional PSTN-line board.
GSM Satellite
Installing the antenna and inserting the GSM SIM card in the
GSM satellite
Before proceeding, make sure the device is off and use all due precaution to
avoid electrostatic discharge.

Remove the GSM satellite cover.

Screw the antenna in the appropriate connector (take care to only rotate
the metal ferrule to fix the antenna; do not rotate the antenna on itself).

Push the SIM Card housing cover as indicated by the arrow OPEN until it
unlocks and lift it.

Carefully slide the SIM Card into its housing cover.

Lower the SIM Card housing cover and push it as indicated by the arrow
LOCK until it locks in place.

Close the GSM satellite cover.
ATTENTION
A GSM SIM card is required.
Do not use 3G/UMTS or 4G/LTE SIM cards.
ATTENTION
It is not required to remove the PIN code prior to
the use of the Helpy Controller.
The PIN code can be entered, if necessary, by
setting parameter 282.
ATTENTION
In order to avoid damage, never power up the
device without having first installed the antenna.