Esse-ti HELPY, Quick Manual

Page: 26 / 36

Page 26 PROGRAMMING
Programming via SMS (only with GSM Satellite)
All parameters programmable locally by the local telephone may also be set via
SMS.
Programming via SMS is possible by any mobile phone or other device
supporting SMS.
An SMS notifying the programming was performed is sent by the Helpy
Controller to the number that sent the programming.
ATTENTION
Programmed performed via SMS sent from the Internet could not
have a positive result if the required format is not followed.
MESSAGE FORMAT
Each programming SMS must contain the password, which allows access to
programming, and the programming codes to be performed.
The message format must be as follows:
Et.he *xxx# c..c c..c
Where:
Et.he
: is the start of the programming string
*xxx# : is the password string (default installer password xxx = 0)
c..c : is the programming code
The strings and programming codes must be separated by a space.
Refer to the related paragraphs for the programming codes.
NOTIFICATION MESSAGE FORMAT
The format of the notification message to the user who sent a programming
SMS is similar to the programming message:
Et!he *xxx# c..c c..cERROR
Where:
Et!he : is the start of the notification string
*xxx
# : is the password string (default installer password xxx = 0)
c..c : is the accepted programming code
c..cERROR : is the refused programming code