Page 18
MINIMUM OPERATIONS TO VERIFY PROPER INSTALLATION
Note: in case it should not be possible to stop the alarm procedure
remotely (i.e. the entered telephone number is incorrect)
simply lift the handset of the local telephone and dial
* <Password> # (by factory default:
) or press the
reset pushbutton.
U
SING THE RESET BUTTON
Note: the reset operation does not alter the previously set
parameters.
Use of the reset pushbutton (H in the picture at page 2):
-
Pressing shortly
Allows to interrupt an alarm call.
By pressing shortly you get the same result as lifting the handset of the
local telephone and entering * <Password> #.
-
Pressing longer (10 seconds)
Allows to reset the device.
By pressing longer, the Helpy 2W-LCP will be re-started with no need to
disconnect the power supply.
Note: it is also possible to reset the device through the code
995*0#.
