Preliminary operations
At first, connect the cable supplied in the kit with the VDE connector, into the corresponding slot
located in the MatrixOne rear panel. Connect the opposite side of the cable to the 220V plug.
The damages caused by the use of other cables, eventually damaged or in any case different from
the one supplied in MatrixOne packaging, will not be recognized as guarantee.
Connect the audio cables (not included) to the output balanced CANNON signal or unbalanced
Jack, located in the rear panel of the MatrixOne unit, to the input of your audio unit (amplified
speakers, high-end, input mixer line, AUX or TAPE input of your home HI-FI or other). It is warmly
recommended to hold the levels of the audio system completely lowered before turning on and off,
by means of the button situated in the rear panel of MatrixOne. ESS declines any responsibility for
possible damages derived by the non respect of this important instruction of use.
Rear Panel. In/Out audio connections
2 3 4 5 6
1
7
11 10 9 8
1)
Connections for pedal commands. By using the special ESS pedal command (optional) it
is possible to determine the assignment of the function choosing among SONG + or -
and Play&Stop or patch change for input, or also keyboard performance change. The
various options are selectable in CONSOLE
UTILITY
GLOBAL
PEDAL1/2 MODE.
2)
Preamplified headphones output. If “MAST” MON=LR” is highlighted (by default the
background color of the button is red) the signal sent will be equal to the one of
“MASTER R/L”, while if MAST” MON=LR” is not highlighted (white button background), it
will be possible to individually regulate the various sound sources (Song - Samples - In
1/2/3/4 - Keyboard and the reverberation percentage relative to audio input.
3)
Principal output Left/Right, unbalanced Jack ¼”
.
4)
Principal output Left/Right, balanced XLR Neutrik
.
3