BP2 OPERATOR’S MANUAL
SAFETY DECALS______________________________________________________________________
Appropriate safety decals are placed on ESS equipment in order to alert the operator to possible dangers.
Charger for
Electrostatic Spraying Systems
LED
MODE
With the mains, connected, the LED
will be orange the first 5-7 seconds, and
be orange when the initialization and
analysis starts. If s battery is connected,
the actual charging will start a few
seconds later when the
LED changes to red/orange
Battery initialization
& analysis
Fast charge
Top-off charge
Trickle charge
Error
This label is placed on the
charger of all sprayguns
The BP2 compressor becomes hot
during normal operation
DO NOT TOUCH
PROTECT YOUR LUNGS
PROTECT YOUR EYES
This label is placed on top of
the BP2 Sprayer, near the
quick connect sockets.
READ AND FOLLOW THE CHEMICAL MANUFACTURER’S INSTRUCTIONS CAREFULLY
It is extremely important for the owner/ operators safety as well as the safety of other
people in the vicinity that all chemical safety precautions are followed.
This label is wrapped around the hose
to remind you to clean the filters
regularly. The number one cause of
poor sprayer performance is a
clogged or dirty filter.
There will be a small shock when
using our sprayers. To avoid this
shock place your thumb on the bolt at
the top of the spraygun.
If you use a pacemaker, use our
electrostatic sprayer at your own risk.
4
If you have a pacemaker, we would recommend that you
not operate an electrostatic sprayer
,
or if you elect to do
so, know that you are accepting any risk associated therewith. Just to be clear, no one, with a pacemaker, has ever
had a problem using our electrostatic sprayers, however, several years ago a physician expressed concern, even
though his opinion was un-tested and not founded in any research. Since that time, we have taken the ultimate safe
approach and recommended that those with pacemakers not operate our electrostatic sprayers.
Pacemaker Disclaimer:
