Professional Series (A)
www.espyindia.com
30
5.9 UTILITIES
5.9.1 PTZ CONFIGURATION
Set PTZ channel, protocol, address, baud rate, etc.
Firstly, set the dome address and ensure the A, B lines of dome and DVR are connected correctly. The
configuration interface:
【
Channel
】
: Select the channel for PTZ camera
【
Protocol
】
: Select associated dome protocol (e.g. PELCOD)
【
Address
】
: Select associated dome address, default: 1
（
Note: this address has to correspond with dome
address, or the dome will not control.
）
【
Baud Rate
】
: Select the dome baud rate and control, default is 9600. Note: the baud rate has to correspond
with the dome address, or the dome will not control).
【
Data Bits
】
Default: 8
【
Stop Bits
】
Default: 1
【
Parity
】
Default: None
