MACHINE WARMING UP AFTER TURNING ON
Flashing will occur for around 40 seconds indicating warm up in progress. The machine is ready when all
the blue function lights appear solid with double flashing lights and 2 beeps will sound.
FUNCTION WORKS IN PROGRESS
Blue function light flashes after a function is used. Flashing will occur for around 30 seconds until the
function is ready to be used again. The machine is ready when tthe blue function light appears solid.
MILK RESERVOIR IS NOT PUT IN PLACE
Blue “CAPPUCCINO” , “LATTE” , “MILK FROTH” and “CLEAN” function lights turn off and do not
work when the milk reservoir is not placed properly or missing. Readjust or install the milk reservoir. Make
sure to hear a “click” sound to confirm it is securely in place.
RED INDICATOR LIGHT
Flashing — Warning
Appears Solid — Wrong Voltage
YELLOW INDICATOR LIGHT
Flashing — Machine Clogged
BLUE FUNCTION LIGHT
Flashing — In Progress
Appears Solid — Ready To Use
FIRST USE - UNLOCKING THE MACHINE
CONTROL PANEL
BLUE FUNCTION LIGHTS
Before using your brand new machine for the very first time, it needs to be unlocked. Follow these steps to get your machine ready to brew.
1. Fill the water tank up to the max line and place it in the machine.
2. Fill the milk reservoir up to the max line. Place it into the machine. Make sure to hear the “click” sound to confirm it is securely in place.
3. Place any filter basket into the portafilter. Then set and twist the portafilter to the machine to lock it in firmly.
4. Place a cup underneath the portafilter.
5. Plug in the machine to the power socket. Press the “ON/ OFF” button to switch on the machine. The red indicator and blue
function lights on the control panel will be flashing.
6. Then, press the “CLEAN” button on the control panel.
7. After a few seconds, water should start flowing through the machine. This cleaning takes 10 seconds.
8. Once the cleaning cycle has finished and the water has stopped dripping, 2 beeps will sound indicating successful completion of
the unlocking. The red indicator light will deluminate and the machine will now warm up. This will take up to 40 seconds and all the
blue function lights on the control panel will flash during warm up. Once the machine is ready to brew, the blue function lights will
appear solid.
CAUTION
• If water does not pour out, remove the portafilter, and press the “CLEAN” button once again.
• If water still doesn’t pour after 5 seconds, press the “CLEAN” button again to stop.
• Repeat this process until water starts flowing through the machine and into the cup.
• Do not stop the cleaning once the water is flowing. Let the cleaning finish and wait for the 2 beeps to sound. This could take
up to 5 tries.
• Once the machine has warmed up, the buttons will have a steady blue light and the machine is ready to use.
“ON / OFF” BUTTON
SINGLE
DOUBLE
CAPPUCCINO
LATTE
MILK FROTH
CLEAN
