39
38
5.6
Wash the removable parts thoroughly
and rinse them under running water. Dry
thoroughly before placing them back on
the housing. If necessary, wash the parts in
lukewarm soapy water.
Do not wash in dishwasher or hot water to
avoid wear and deformation of the parts.
Dry the parts and follow the steps in
'Assembling the Smart Slow Juicer' to
reassemble the device.
•
Smart Slow Juicer
•
User Manual
•
Cleaning brush
•
Container for juice
•
Container for pulp
•
Pusher
Technical specifications
Package contents
Model:
EP6900
Voltage:
230V~ 50/60Hz
Power:
150 W
Net weight:
4,4 kg
Dimensions (HxWxD):
525 x 221 x 176 mm
Rotation speed of press screw:
50 RPM
Maximum continuous operating time:
15 minutes
Interval between each use:
5 to 20 minutes
Troubleshooting
Problem
Possible cause
Solution
The device is connected
to the mains but does
nothing when the
Start (on/off) button is
pressed.
•
The plug is not fully inserted into the
socket.
•
The overload and damage protection
system is activated after prolonged use
of the unit.
•
The components of the Smart Slow Juicer
are not assembled correctly.
•
Plug the power cord securely and
completely into the power outlet.
•
Unplug and let cool for 30 minutes.
Then try again.
•
Reassemble the Smart Slow Juicer
according to the instructions in
'Installing the Smart Slow Juicer'.
Strange smell
at first use.
•
When using a new appliance for the first
time, an odour may be released.
•
If the smell persists after several uses,
contact your point of purchase.
The Smart Slow Juicer
no longer works during
operation.
•
Too many ingredients can cause a
blockage in the press chamber.
•
The overload and damage protection
system is activated.
•
Use the reverse button to remove the
blockage. Add ingredients more slowly
and do not press too hard. Use harder
fruit in combination with softer fruit. Cut
into smaller pieces.
•
Unplug and restart the unit after a 30
minute break.
The juice contains too
much pulp.
•
The plastic filter may be damaged
•
The plastic filter is not mounted or not
mounted correctly
•
Replace the plastic filter
•
Position correctly according to 'Installing
the Smart Slow Juicer'.
Strong vibrations and
a strange sound occur
during the first use.
•
The filter or the pressure screw is not
correctly fitted or is damaged.
•
The motor has been damaged during
transport or by a fall.
•
Fit correctly according to 'Installing the
Smart Slow Juicer' or replace.
•
Please contact the point of sale.
Juice is leaking between
the upper part and the
housing.
•
The rubber seals in the pressing chamber
are incorrectly mounted, damaged or
worn.
•
Attach the seals correctly or replace
them. The rubber lip should be in the
pulp outlet and the round ring on the
middle part of the press chamber.
Always position in this way before
pressing.
The hopper does not fit
properly on the press
chamber.
•
The filter or the pressure screw is not
correctly mounted.
•
Assemble the filter and squeezing screw
correctly according to 'Assembling the
Smart Slow Juicer' so the plastic filter
and squeezing screw are correctly
positioned on the press chamber.
These are the most common problems and solutions. For any other questions, please contact your
local Smart Slow Juicer dealer.
Note:
The warranty will be voided if repairs are made to the Smart Slow Juicer and the housing is
opened unless this is done by an authorised Espressions service point.
Summary of Contents for EP6900
Page 28: ...55 54 Notes...
