1
Overview
1 Overview
1.1 Module Overview
ESP32-WROOM-DA is a powerful Wi-Fi + Blu Bluetooth LE MCU module, with two complementary PCB
antennas in different directions. This module is embedded with ESP32-D0WD-V3 with a rich set of integrated
components including SPI flash and 40 MHz crystal oscillator. With two unique antennas design on one single
module, ESP32-WROOM-DA can be used to develop IoT applications that need stable connectivity over a broad
spectrum, or to deploy Wi-Fi in challenging and hazardous environments, or to overcome communication problems
in Wi-Fi-dead spots. This module is an ideal choice for indoor and outdoor devices for smart home, industrial
control, consumer electronics, etc.
Table 1: ESP32WROOMDA Specifications
Categories
Items
Specifications
Wi-Fi
Protocols
802.11 b/g/n (802.11n up to 150 Mbps)
A-MPDU and A-MSDU aggregation and 0.4
µ
s guard
interval support
Frequency range
2412
~
2484 MHz
Bluetooth
®
Protocols
Protocols v4.2 BR/EDR and Bluetooth
®
LE specifica-
tions
Radio
Class-1, class-2 and class-3 transmitter
AFH
Audio
CVSD and SBC
Hardware
Module interfaces
SD card, UART, SPI, SDIO, I2C, LED PWM, Mo-
tor PWM, I2S, IR, pulse counter, GPIO, capacitive
touch sensor, ADC, DAC, TWAI
®
( compatible with
ISO 11898-1, i.e. CAN Specification 2.0)
Integrated crystal
40 MHz crystal
Integrated SPI flash
8 MB
Operating voltage/Power supply
3.0 V
~
3.6 V
Operating current
Average: 80 mA
Minimum current delivered by power
supply
500 mA
Recommended operating tempera-
ture range
–40
~
85 °C
Moisture sensitivity level (MSL)
Level 3
Espressif Systems
4
ESP32-WROOM-DA User Manual v0.5