9
TECHNICAL DATA
Voltage
230V
~
50Hz
Fuse
6
Amp
Power
300
W
Max. pump rate
1100 l/h
Max. suction height
50 m
Max. immersion depth 7 m
Max. liquid temperature 35
˚
C
Outlet
16
mm
Cord length
10 m
Power cord
H05RN-F3G0.75 mm²
Protection class
IPX8
Tube min. diameter
110 mm
Weight
15,2
kg
PRIOR TO USE
Unpack the appliance and check that all parts are included. If any part is missing or dam-
aged, contact your dealer immediately. Dispose all packing material according to local regu-
lations.
OPERATION
-
The pump can be placed to the bottom of the tube or well (Ø min. 110 mm) or suspend-
ed from the specially provided handle with a rope. If the pump is placed on the bottom,
make sure that no sludge or other dirt cannot enter the pump.
-
Always check that the power supply corresponds to the voltage on the rating plate. Plug
the pump into a socket outlet. The vibration pump is now ready for use.
MAINTENANCE
ATTENTION! Remove the mains plug before any maintenance work.
-
Check the pump frequently for wear or damages.
-
If the pump is often transported in the course of operation, it should be cleaned with
clean water after each use.
-
In case of stationary installation, the function of the loading switch should be checked
every 3 months.
-
All fibrous particles which may have built-up inside the pump housing should be removed
with water. Do not let the sludge or other dirt dry out. Clean the pump immediately after
it gets dirty. The dry dirt might cause problems starting up.
-
Store the vibration pump in a dry place and protect it from frost damage. Prior to stor-
age, empty and clean the pump.
Summary of Contents for XK8003
Page 11: ......
