ESP Varimax I ASHP, Installation And Operation Manual, Page: 15 / 52

15 of 52
V 1.7
www.esavep.com
PASRW040-D-BP
7.0 Electrical Connection
7.1 Warning Notes
IMPORTANT! All electrical work MUST be carried out by a suitably
qualified electrician. We know that suitably qualified electricians charge
professional level fees for work that they carry out, but it is better to pay a
professional/fully qualified electrician to connect your unit in to an
appropriate power supply in the correct way, than for you to die trying or
as a result of a fire in your property caused by inappropriate or incorrect
electrical works. Also, it is law that only qualified electricians should
install, repair or maintain electrical connections and, if you do not kill
yourself installing the unit, you run the risk of prosecution if you do not
comply with the law. It is not an exaggeration to say that, if you
install/connect your unit to a power supply and that
installation/connection causes injury to, or death of someone (even years
after installation), you can be prosecuted under criminal law for murder,
manslaughter or bodily harm and spend many years in prison as a result.
IT IS NOT WORTHWHILE RUNNING THIS RISK.
SO, GET YOUR UNIT WIRED IN BY A PROFESSIONALLY QUALIFIED
ELECTRICIAN IF YOU DO NOT KNOW SOMEBODY THAT IS QUALIFIED TO
DO THE WORK, FIND SOMEONE AND DO NOT BREAK THE LAW BY DOING
THE WORK YOURSELF.
7.2 MCB
The connection to the electrical consumer unit in the property must
comply with current electrical standards and Regulations and be done via
a dedicated breaker on the consumer unit that corresponds to the heat
pump electrical capacity. Failure to do this correctly can result in fire
and/or permanent damage to the unit. If the unit is not appropriately
wired in to a suitable supply, the warranty on the unit will be voided. The
MCB must be a type C 24 Amp MCB.