9
OSD Menu Features
MAIN MENU
System Information
Display system information
Display Setting
Configuration of on-screen information
System Setting
Configuration of system parameters
IR LED Setting
Configuration of IR illumination parameters
Restart Camera
Restart the zoom module
Reset
Revert to factory default settings
SYSTEM INFORMATION
Protocol
Set control protocol to Pelco/Hik/Auto
Baud Rate
Set control baud rate to 2400/4800/9600/Auto
Hard Addr
Display current address/ID set by DIP switches (0-255)
Soft Addr
Configure a new address/ID to override Hard Address (0-255)
Enable Soft Addr
Enable the Soft Addr function
Temperature
Display current internal temperature of camera
Version
Display current firmware version
DISPLAY SETTING
Info Tip(s)
Configure on-screen information such as Preset and Pattern
functions. Can be set to never time-out or1-5s time-out.
PTZ Display(s)
Configure on-screen PTZ directional info. Can be set to never
time-out or1-5s time-out.
RESTART CAMERA
Select to restart the zoom module.
RECOVER FACTORY SETTING
Select to load all factory default settings, power the camera down to take effect.
PTZ10EXT Manual_Layout 2 18/03/2014 09:28 Page 9