Enterview Multi
06|07
Installation
1. It is recommended to mount the flush Box at the height of average
adult’s eyelevel from the ground (Approx 1500mm/59inches)
2. Mount front panel on the flush Box with provided hexagonal screws.
3. Assemble each side mounting bracket on the front panel with
provided hexagonal screws.
4. Leave the front panel unattached on the wall before you make sure
all the stations have been installed and wired properly.
Wiring
Plug wires(from tenant monitor) into connectors on
the camera respectively according to illustrated
diagrams as below.
Note
: 1. The connection between wires and connectors should be
completed in the reverse side of your desired call buttons
2. No additional system set-up is necessary after wiring
