Esoteric Grandioso C1X, Owner'S Manual

Page: 24 / 84

24
Remote control input (RS-232C) connector
setting
RS232C>***
Set this to ON only when using the remote control input (RS-232C)
connector.
o
By default, the setting is OFF.
OFF
The remote control input (RS-232C) connector cannot be used.
ON
The remote control input (RS-232C) connector can be used.
Trigger signal output setting
TRIG_O>***
o
By default, the setting is OFF.
OFF
Do not output trigger signals.
ON
Output trigger signals.
Restoring factory settings
SETUP>***
Use to restore the factory default settings, erasing all changes in
memory.
Follow the procedures below to initialize the settings.
1) Use the INPUT (
l
/
;
) buttons to show “CLR”.
2) While “CLR” is shown, press and hold the SETUP button.
F/W **.**
This shows the firmware version.
“**.**” is the version.
MENU 3 (continued)