b) Rout the motor cable from the speedbox to the motor
and solder its end to the motor. The white lead connects
to the “+” sign on the motor tab. Do not linger while
soldering and use only enough heat to melt the solder
and have it adhere the wire to the tab.
c) If available, use existing cable clamps to dress the
leads into a convenient place.
5. CALIBRATION.
The box is factory adjusted to provide almost the correct speed.
a) Set the START/STOP switch to STOP, the SPEED switch to 33, and the CAL/VAR switch to CAL.
b) Plug the power adapter into a convenient power outlet.
c) Switch to START. Using a strobe disc on the platter and viewing with incandescent or florescent light, calibrate each speed
with a small screwdriver.
6. OPERATION
a) Use the START/STOP switch to start platter rotation or top it.
b) Normal position of the CAL/VAR switch it CAL. To vary pitch, set the switch to VAR and rotate the PITCH switch to
obtain the desired speed. A very wide range of adjustment is provided.
7. PROBLEMS
Speed is way off
Maybe the turntable it very un-level. The belt may be on the pulley flange instead of in the pulley.
Check the Pitch Control settings.
No power
The power supply plug could be pulled out from the speed box.
Can hear the motor
This is normal with DC motors. Should be a very soft purr, almost inaudible at 33.
LIMITED WARRANTY
The suitability of this product for use on your turntable is solely your responsibility. We assume no responsibility for your decision . It is fully
warranted against defective materials or workmanship under the normal use for the warranty period of 6 months from time of purchase to the
original owner. Repairs, adjustment for defects or replacement of parts will be performed free of charge, except:
a) If equipment has been damaged by accident or mishandling.
b) If equipment has been serviced or modified by other than our authorized agents.
c) In case of theft, loss, fire or other calamities by the Acts of God.
ESOTERIC SOUND
HEMSTOCK AVE.
WHEATON, IL 60189
VOICE/FAX: (630) 933-9801
E-MAIL: [email protected]
