5. Now take out the used battery and replace it by a new, identical in
construction battery (illustration 7).
6. Now correctly attach the rubber gasket onto the bottom part. In doing so,
make sure that it sits correctly! The bulges have to sit above the buttons.
7. Now reattach the black plastic lid exactly and screw the screws back in
with a suitable screwdriver.
8. Now firmly screw in the black bottom part into the bottom side of the lamp
clockwise.
Note:
Used batteries or accumulators must be disposed of in a non-polluting
way and do not belong into the domestic waste. Your dealer is legally obliged to
take back the old accumulators
.
7. Malfunctions
The lamp is not activated at darkness
-
A source of extraneous light (e.g. street lamp) simulates daylight
on the solar module and prevents the activation. Place the solar
module at a darker place
.
The lamp is not switched on at darkness at all or only for a short time?
- Is the spotlight switched on
- Battery weak or defective?
Exchange of the battery pack every 2 years at the latest!
8. Technical Data
• Solar module:
0,4 Wp crystalline
• Illuminants:
2 LEDs
• Light color white:
4500 K (day-light white)
• Material lamp:
PE
• Protection type light globe: IP 65
• Protection class:
III
• Temperature range:
-10°C up to +40°C
• Duration of illumination with
a fully charged battery:
max. 10 h
• Rechargeable battery:
1 x NiMh 1,2 V/ 400 mAh (Mignon)
All spare parts are available under www.esotec.de
Copyright esotec GmbH
3.
4.
5.
6.
7.
