Fuel supply line
Fuel spray line
Air pressure line
Set Screw (3x4mm)
Set Screw (2mm)
Rod (2x400mm)
Set Screw (2mm)
Washer (2mm)
Linkage Stopper
2
2
2
2
2
Washer (4x8mm)
8
Rod (2x400mm)
Set Screw (3x4mm)
Linkage Stopper
Washer (2mm)
Washer (2mm)
Nut (2mm)
Nut (2mm)
Set screw (3x4mm)
Set screw (3x4mm)
2
2
2
2
1.5mm
Linkage Stopper
2
Throttle servo
Fuel tank (448cc) 2
Assemble the accelerator push rod to the engine.
The sketch map when the engine install completion.
Install the servo of throttle.
Assemble the throttle servo in the fuselage.
Assemble the fuel tank as below.
Epoxy the fuel tank to the side fuselage.
28
29
30
31
32
6
27
1.5mm
1.5mm
12
TP Screw (2.3x8mm)
Ply (15x15x3mm)
12
Epoxy plies inside the fuselage under the canopies
aand mount the cowing with TP screw as illustration.
2mm
6mm
2
Wood dowel (4x30mm)
4mm
40mm
Collar(2mm)
Wooden Block
Screw
3mm
18mm
Cut away the surplus parts of the canopy
carefully along the shaded line.
Epoxy plies under the fibre canopy and mount
the PVC canopies with TP screw.
Drill two holes to appropriate in the fibre canopy
and epxoy wood dowel in them.
Epoxy the hatch thimble to appropriate position
inside the canopy.
Drill two holes to the relevant position in the fuselage.
Drill a hole to appropriate position in the fuselage as below.
77
78
79
80
81
15
76
